Celebrating 20 Years in Business | Distributor | Competitive International Freight | Stockist | Free UK Delivery over 100

Coelbo Inverters

COELBO INVERTER
Also known as frequency converter, it keeps constant pressure independently of the flow demand.
It avoids "water hammer" effect because both start and stop of the pump are carried out progressively, allowing, in some cases, to be installed without the hydro pneumatic expansion tank.
Products: Speedmatic Speedbox Speedboard
Speedmatic Easy 12 MM

Speedmatic Easy 12 MM

Coelbo Speedmatic Easy 12 MM Inverter.
Pump Inverter for one single-phase pump with variable speed.
Plug and play unit.
General electric supply is single-phase 230 Vac. Easy to setup and operate, as it’s only necessary to connect and select the setpoint pressure.

Coelbo Speedmatic Easy 12 MM Inverter.
Pump Inverter for one single-phase pump with variable speed.
Plug and play unit.
General electric supply is single-phase 230 Vac. Easy to setup and operate, as it's only necessary to connect and select the setpoint pressure.

Power supply voltage - 1 x 230 Vac
Frequency - 50/60 Hz
Output - 1 x 230 Vac
Max. current - 12a
Max. peak of current - 20% 10"
Range of set pressure - 0,5 ÷ 8 bar
Protection degree - IP55
Max water temperature - 40 ºC
Max environment temperature - 50 ºC
Net weight (without cables) - 2.5Kg
Inlet and outlet threads - G 1 1/4”M
Max flow - 10 000 l/hr



290.00 (Ex VAT)
Speedmatic Easy 10 MT

Speedmatic Easy 10 MT

Coelbo Speedmatic Easy 10 MT Inverter.
Pump Inverter for one 3-phase pump with variable speed.
Plug and play unit.
General electric supply is single-phase 230 Vac. Easy to setup and operate, as it’s only necessary to connect and select the setpoint pressure.

Coelbo Speedmatic Easy 12 MM Inverter.
Pump Inverter for one 3-phase pump with variable speed.
Plug and play unit.
General electric supply is single-phase 230 Vac. Easy to setup and operate, as it's only necessary to connect and select the setpoint pressure.

Power supply voltage - 1 x 230 Vac
Frequency - 50/60 Hz
Output - 3 x 230 Vac
Max. current - 10a
Max. peak of current - 20% 10"
Range of set pressure - 0,5 ÷ 8 bar
Protection degree - IP55
Max water temperature - 40 ºC
Max environment temperature - 50 ºC
Net weight (without cables) - 2.5Kg
Inlet and outlet threads - G 1 1/4”M
Max flow - 10 000 l/hr



290.00 (Ex VAT)
Speedbox 1010 MT

Speedbox 1010 MT

Coelbo Speedbox 1010 MT + 10 bar Transducer
230v 1 phase supply to 230v 3 phase motor.

Wall mounted pump driver for a single pump with variable speed.
Designed for the automation of 230v 3-phase pumps managed by inverter.
General electrical supply is ~1x230 Vac .
It can be mounted individually or in groups of 2 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Power supply voltage - ~1 x 230 Vac
Frequency - 50/60 Hz
Output voltage - ~3 x 230 Vac
Max current - 10A
Max peak current - 20% 10"
Range of set pressure - 0,5 ÷ 16 bar
Protection degree - IP55
Output transdeucer - 4-20mA
Max environment temperature - 50 ºC
Net weight (without cables) - 4.5kg
Cooling system - Forced Convection
380.00 (Ex VAT)
See More
OUT OF STOCK
Speedbox 1309 TT

Speedbox 1309 TT

Coelbo Speedbox 1309 TT + 10 bar Transducer
400v 3 phase supply to 400v 3 phase motor.

Wall mounted pump driver for a single pump with variable speed.
Designed for the automation of 400v 3-phase pumps managed by inverter.
General electrical supply is ~3x400 Vac .
It can be mounted individually or in groups of 2 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Power supply voltage - ~3 x 400 Vac
Frequency - 50/60 Hz
Output voltage - ~3 x 400 Vac
Max current - 9A
Max peak current - 20% 10"
Range of set pressure - 0,5 ÷ 16 bar
Protection degree - IP55
Output transdeucer - 4-20mA
Max environment temperature - 50 ºC
Net weight (without cables) - 4.5kg
Cooling system - Forced Convection
380.00 (Ex VAT)
See More
OUT OF STOCK
Speedmatic Master 1110

Speedmatic Master 1110

Coelbo Speedmatic Master 1110 Inverter.

Coelbo Speedmatic Driver for a single pump with variable speed, it can be communicated to other identical devices managing a maximum
of 4 pumps. Comunication can be carried out using cables.

Coelbo speedmatic Driver for single-phase or three-phase pump managed by INVERTER.

General electric supply is 230 Vac.
It can be mounted individually (only one pump) or in group of 2, 3 or 4 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

The communication of 2 devices is direct using cables.

The communication of 3 or 4 units is carred out through of the communication center Coelbo SPEEDCENTER

Installation Manual 2.3mb
325.00 (Ex VAT)
Speedmatic Set Alt 21110 MM

Speedmatic Set Alt 21110 MM

Coelbo Speedmatic Set 21110 MM Inverter.
Twin Pump Inverter
Inverter for two single phase pumps with alternated operation sequence. Patented system.

Coelbo SPEEDMATIC SET ALT 21110 MM is a compact automatic control device designed for the automation of pressure groups with 2 pumps, with an electronic system managed by a software responding to the rigorous requirements of efficiency and safety.

It includes a frequency inverter for the main pump control regulating the speed in order to keep
constant the pressure independently of the flow given, the auxiliary pump is managed by mean of power relay.
There is alternated operating sequence, this means that the pump managed by the inverter is changed in each operating cycle and it is always the first to start

Power supply voltage - 1 x 230 Vac
Frequency - 50/60 Hz
Max current main pump - 10A (~1 x 230 Vac)
Max current auxiliary pump - 10A (~1 x 230 Vac)
Max operating pressure - 16 bar
Range of set pressure - 0,5 ÷ 12 bar
Protection Index - IP55
Max water temperature - 40 ºC
Max environment temperature - 50 ºC
Net weight (without cables) - 3,6-4 kg
Inlet and outlet threads - G 1 1/4
Max flow - 15000 L/hr



512.00 (Ex VAT)
Speedmatic setup

Coelbo Speedmatic Set Alt Video

Speedboard 1010 MT

Speedboard 1010 MT

Coelbo Speedboard 1010 MT + 10 bar Transducer
230v 1 phase supply to 230v 3 phase motor.

"INVERT ONLY NO PUMP SUPPLIED"
Motor mounted pump driver for a single pump with variable speed.
Designed for the automation of 230v 3-phase pumps managed by inverter.
General electrical supply is ~1x230 Vac .
It can be mounted individually or in groups of 2 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Speedboard Installation Presentation

Power supply voltage - ~1 x 230 Vac
Frequency - 50/60 Hz
Output voltage - ~3 x 230 Vac
Max current - 10A
Max peak current - 20% 10"
Range of set pressure - 0,5 ÷ 16 bar
Protection degree - IP65 (or maximum of Motor)
Output transdeucer - 4-20mA
Max environment temperature - 50 ºC
Net weight (without cables) - 2.1kg
Cooling system - Forced Convection
325.00 (Ex VAT)
Speedboard 1305 TT

Speedboard 1305 TT

Coelbo Speedboard 1305 TT + 10 bar Transducer
400v 3 phase supply to 400v 3 phase motor.

"INVERT ONLY NO PUMP SUPPLIED"
Motor mounted pump driver for a single pump with variable speed.
Designed for the automation of 400v 3-phase pumps managed by inverter.
General electrical supply is ~3x400 Vac .
It can be mounted individually or in groups of 2 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Speedboard Installation Presentation

Power supply voltage - ~3 x 400 Vac
Frequency - 50/60 Hz
Output voltage - ~3 x 400 Vac
Max current - 5A
Max peak current - 20% 10"
Range of set pressure - 0,5 ÷ 16 bar
Protection degree - IP65 (or maximum of Motor)
Output transdeucer - 4-20mA
Max environment temperature - 50 ºC
Net weight (without cables) - 2.1kg
Cooling system - Forced Convection
370.00 (Ex VAT)
Speedboard 1309 TT

Speedboard 1309 TT

Coelbo Speedboard 1309 TT + 10 bar Transducer
400v 3 phase supply to 400v 3 phase motor.

"INVERT ONLY NO PUMP SUPPLIED"
Motor mounted pump driver for a single pump with variable speed.
Designed for the automation of 400v 3-phase pumps managed by inverter.
General electrical supply is ~3x400 Vac .
It can be mounted individually or in groups of 2 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Speedboard Installation Presentation

Power supply voltage - ~3 x 400 Vac
Frequency - 50/60 Hz
Output voltage - ~3 x 400 Vac
Max current - 9A
Max peak current - 20% 10"
Range of set pressure - 0,5 ÷ 16 bar
Protection degree - IP65 (or maximum of Motor)
Output transdeucer - 4-20mA
Max environment temperature - 50 ºC
Net weight (without cables) - 2.1kg
Cooling system - Forced Convection
390.00 (Ex VAT)